Maintenance information and precautions

Removing dust from inside the viewfinder

CCD-TR311 only

(1) Remove the screw with a screwdriver (not supplied). Then, while sliding the RELEASE knob, turn the eyecup in the direction of the arrow and pull it out.

(2) Clean the surface with a commercially available blower.

1

2

To reattach the eyecup

(1) Align the groove on the eyecup with the • mark on the barrel.

(2) Turn the eyecup in the direction of the arrow. Then replace the screw.

1

2

Caution

Do not remove any other screws. You may remove only the screw to remove the eyecup.

62

Page 62
Image 62
Sony CCD-TR311 Maintenance information and precautions, Removing dust from inside the viewfinder, To reattach the eyecup