Trouble check

Operation

Symptom

Cause and/or Corrective Actions

START/STOP does not operate.

• The tape is stuck to the drum.

 

mEject the tape. (p. 11)

 

• The tape has run out.

 

mRewind the tape or use a new one. (p. 21)

 

• The POWER switch is set to VTR/PLAYER.

 

mSet it to CAMERA. (p. 12)

 

• The tab on the cassette is out (red).

 

mUse a new tape or slide the tab. (p. 11)

Recording stops in a few seconds.

• The START/STOP MODE switch is set to 5SEC or

 

.

 

mSet it to . (p. 16)

 

 

 

 

The cassette cannot be removed from

• The battery is dead.

the holder.

mUse a charged battery pack or the AC power adaptor.

 

(p. 8, 23)

{ and 6 indicators flash and no

• Moisture condensation has occurred.

function except for cassette ejection

mRemove the cassette and leave the camcorder for at least

works.

1 hour. (p. 61)

 

The date or time indicator is flashing. • You pressed DATE and TIME together for more than 2 seconds.

mThe camcorder is not malfunctioning. You may start recording. Flashing will stop soon.

The lithium battery is weak or dead.

mReplace the lithium battery with a new one. (p. 53)

The tape does not move when a

• The POWER switch is set to CAMERA or OFF.

video control button is pressed.

mSet it to VTR/PLAYER.

 

• The tape has run out.

 

mRewind the tape or use a new one. (p. 21)

The Steady Shot function does not

• STEADY SHOT is set to OFF.

activate. (CCD-TR414/TR940 only)

mSet STEADY SHOT to ON. (p. 50)

 

• The Steady Shot function does not work when the wide

 

mode is set to 16:9FULL.

The autofocusing function does not

• FOCUS is set to MANUAL.

work. (CCD-TR940 only)

mSet it to AUTO. (p. 38)

 

• Shooting conditions are not suitable for autofocus.

 

mSet FOCUS to MANUAL to focus manually. (p. 38)

The fader function does not work.

• The START/STOP MODE switch is set to 5SEC or

 

.

(CCD-TR940 only)

mSet it to . (p. 16)

 

 

 

 

No sound or only a low sound is

• The stereo tape is played back with HiFi SOUND set to 1

heard when playing back a tape.

or 2 in the menu system.

(CCD-TR940 only)

mSet to STEREO in the menu system. (p. 25)

 

Excessive high-pitched sound is

• The picture has been recorded with WIND set to ON in

heard. (CCD-TR940 only)

the menu system.

 

mWhen there is no wind, set it to OFF. (p. 25)

The date or time indicator

• Reset the date and time. (p. 55)

disappears.

 

 

 

 

 

 

 

 

 

 

 

 

(to be continued)

Additional information

67

Page 67
Image 67
Sony CCD-TR311 operating instructions Trouble check, Symptom Cause and/or Corrective Actions