Overview

When Using the RM-M7G

Remote Control Unit

The RM-M7G Remote Control Unit can be connected directly to this unit. When this unit is powered on, it is set up to control the camera/camcorder. If you have connected an RM-M7G, do the following to set up this unit and the RM-M7G for control from the RM-M7G.

1 Set the system setting switches (see “qh System setting switches”on page 18) on the front panel of this unit according to the connected device.

2 Do the following on the RM-M7G.

•Set the CAMERA SELECT switch to 1.

•Press the PANEL ACTIVE button.

To control the video camera from this unit Press the PANEL ACTIVE button on the front panel.

Note

When the camera is being controlled from the front panel of this unit or during automatic white/black balance adjustment, the PANEL ACTIVE button on the RM-M7G may not work. If this occurs, press the RM-M7G PANEL ACTIVE button after completion of the camera control operation from the front panel of this unit or automatic white/black balance adjustment operation.

14