When this unit is connected to a camera via a CA-D50 or CA-537/537P Camera Adaptor or when it is connected to a DSR-370/370P/570WS/570WSP camcorder, return video signals can be sent to the camera/camcorder.
Note
When using a CA-537/537P with a serial number of 33271 or higher, set the return signal mode to B&W (see “qh System setting switches” on page 18).
Prompter signals
Prompter signals can be sent to a camera adaptor when this unit is connected to a CA-D50 or a CA-537/537P with a serial number of 33271 or higher. When sending prompter signals, set the return signal mode to B&W (see “qh System setting switches” on page 18).
When a DSR-370//370P/570WS/570WSP camcorder is connected to this unit, it is not possible to send prompter signals to the camcorder.
Camera Cable Length
When using an optional CCZ-An camera cable (n in the model name is a number expressing the cable length in meters), analog transmission distance can be extended up to a maximum of 300 meters (about 999 feet), and digital transmission distance can be extended up to about 75 m (about 246 feet). Use the CABLE COMP buttons (see page 17) on this unit to set a cable compensation value according to the length of the cable you are using.
When a DSR-370//370P/570WS/570WSP camcorder is connected to this unit, reference sync signal and return signal transmission distance can be extended up to 150 m (about 492 feet).
The unit can be mounted in a standard 19-inch studio rack with the supplied mounting brackets.
For more information about rack mounting, contact your Sony dealer or a Sony service representative.
Rack mounting brackets (supplied)
