No. | Description | Value |
|
|
|
1 | CA SDI PLL status | OK, NG |
|
|
|
2 | 200 m (656 feet) cable | ON, OFF |
| compensation setting |
|
|
|
|
3 | Return signal mode | COLOR, B/W |
|
|
|
4 | ON, OFF | |
|
|
|
5 | Output mode setting | Y/C, R/G/B, |
|
|
Changing Settings
When the MENU button on the front panel is lit, a menu appears on the monitor connected to the MONITOR OUT connector, allowing you to change the settings of the system including this unit.
To operate the menu
Proceed as follows.
1 Press the MENU button on the front panel, turning it on.
A menu appears on the monitor connected to the MONITOR OUT connector.
2 Press the SELECT up or down button to select a page, and then press the ENTER button.
3 Press the SELECT up or down button to select a menu item, and then press the ENTER button.
4 Press the SELECT up or down button to select a setting for the item, and then press the ENTER button.
Press the CANCEL button to return to the previous state.
Page1: Setup Menu page
This page controls camera/camcorder and CCU functions.
|
|
|
| *Setup Menu* |
1 |
|
| MATRIX | : STANDARD |
|
| |||
2 |
|
| IRIS | : STANDARD |
|
| |||
3 |
|
| EVS | : OFF |
|
| |||
4 |
|
| TITLE | : OFF |
|
| |||
5 |
|
| CLOCK | : OFF |
|
| |||
6 |
|
| RCP RATE | : 38400 |
|
| |||
7 |
|
| TLCS | : OFF |
|
| |||
8 |
|
| SKIN DTL | : OFF |
|
| |||
|
|
|
|
|
No. | Function | Settings | Factory | |
|
|
| default setting | |
|
|
|
|
|
1 | Switch color matrix | STANDARD, | STANDARD | |
| function. a) | COLORFUL, |
|
|
|
| FL LIGHT |
|
|
|
|
|
|
|
2 | Switch AUTO IRIS | STANDARD, | STANDARD | |
| mode. | SPOT 1., |
|
|
|
| BACK 1. |
|
|
|
|
|
|
|
3 | Turn EVS on and off. | ON, OFF | OFF | |
|
|
|
|
|
4 | Turn TITLE display on | ON, OFF | OFF | |
| and off. |
|
|
|
|
|
|
|
|
5 | Turn time display on | CAM, | OFF | |
| and off. b) | BARS, OFF |
|
|
6 | Set communications | 38400, 9600 | 38400 |
|
| speed for REMOTE |
|
|
|
| connector on the rear |
|
|
|
| panel. c) |
|
|
|
7 | Turn TLCS function on | ON, OFF | OFF | |
| and off. d) |
|
|
|
8 | Turn skin detail | ON, OFF | OFF | |
| function on and off. d) |
|
|
|
a)This can also be set for the
b)When the CCU command mode (see “qh System setting switches” on page 18) is set to on (TX7 mode), the selections for this item are CAM, BARS, and OFF. When the CCU command mode is set to off (M5A mode), the selections for this item are ON and OFF. For details, refer to the operation manual of the camera/ camcorder.
c)Always select 38400 when a
d)This item does not appear when the CCU command mode is set to off (M5A mode).
26