Location and Function of Parts
5CALL button
Press to call the camera operator over the intercom. When this button is pressed, the TALLY indicator in the camera’s viewfinder and on this unit lights up.
6DETAIL control
Rotate to adjust the contours of objects.
7GAIN switch
Use this switch to set any of three video amplifier gain levels (18, 9, or 0 dB). Normally, set this switch to 0. When the lighting on object is low, set it to 9 or 18.
8KNEE adjustment section
KNEE
AUTO
PRESET
MANUAL
KNEE switch KNEE control
KNEE switch
Use this switch to adjust the knee setting. AUTO: The auto knee circuit activates and
automatically adjusts the knee point to the optimum level.
PRESET: Knee point is adjusted to
MANUAL: Knee point can be set manually using the KNEE control.
KNEE control
When the KNEE switch is set to MANUAL, rotate this control to set the knee point.
9W/B BALANCE adjustment section
W/B BALANCE switch
BLACK button and the indicator
WHITE button and the indicator
W/B BALANCE
BLACK WHITE
AUTO
PRESET
MANUAL
PED | B | R | GAIN |
R | B |
PED controls | GAIN controls |
W/B BALANCE (white/black balance adjustment mode) switch
Use this switch to select the white and black balance adjustment mode.
AUTO: This sets auto adjustment mode. It enables the white and black balance to be automatically adjusted using the WHITE and BLACK buttons. The adjusted values are stored in memory in the camera and are called up when the switch is set to this position again.
PRESET: This sets preset mode. The camera operates with the
MANUAL: Sets manual adjustment mode. It enables the white and black balance to be manually adjusted using the PED and GAIN controls.
BLACK (black balance automatic adjustment) button and the indicator
Use to adjust the black balance automatically.
Press this button while the W/B BALANCE switch is set to AUTO or PRESET. When the adjustment is completed, the indicator lights up for about five seconds and turns off.
10