![Advanced CD or MP3/WMA disc playback (continued)](/images/new-backgrounds/26365/2636523x1.webp)
Advanced CD or MP3/WMA disc playback (continued)
■Random play
The tracks on the disc can be played in random order automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote control until “RANDOM” appears. Press the /
(CD
/
) button.
To cancel random play:
Press and hold the PLAY MODE button until “NORMAL” appears and “R” disappears.
Notes:
●If you press the button during random play, you can move to the track selected next by the random operation. On the other hand, the button does not allow you to move to the previous track. The beginning of the track being played will be located.
●In random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks.)
Caution:
After performing repeat play, be sure to press the
(CD
) button. Otherwise, the disc will play continuously.
■Programed play (CD)
You can choose up to 32 selections for playback in the order you like.
1While in the stop mode, press the MEMORY button on the remote control to enter the programming save mode.
2Press the or
buttons on the remote control to select the desired track.
Selected track number
3Press the MEMORY button to save the track number.
4Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be programed. If you want to check the programed tracks, press the MEMORY button repeatedly. If you make a mistake, the programed tracks can be cleared by pressing the CLEAR/DIMMER button.
5Press the /
(CD
/
) button to start playback.
■Programed play (MP3/WMA)
1While in the stop mode, press the MEMORY button to enter the programming save mode.
2Press the TUNING ( or
) button on the remote control to select the desired folder.
Then press the or
button on the remote control to select the desired tracks.
3Press the MEMORY button to save the folder and track number.
4Repeat steps 2 – 3 for other folder/tracks. Up to 32 tracks can be programed.
5Press the /
(CD
/
) button to start playback.
To cancel the programed play mode:
During programed stop mode, press the (CD
) button. The display will show “MEM CLEAR” and all the programed contents will be cleared.
Adding tracks to the program:
If a program has been previously stored, the “MEMORY” indicator will be displayed. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the last track of the previous program.
Notes:
●When a disc is ejected, the program is automatically canceled.
●If you press the
●During the program operation, random play is not possible.