Sony CD-DH790N Listening to the iPod continued, To insert iPod adaptor, iPod playback

Listening to the iPod (continued)

■To insert iPod adaptor

1Press the ON/STAND-BY button to turn the power on.

2Insert the iPod adaptor into the iPod dock and connect your iPod.

iPod (bottom)

iPod

Dock connector

		MINI COMPONENT SYSTEM
POWER
ON/STAND-BY	POWER	FUNCTION
	ON/STAND-BY
		VOL

iPod adaptor (not supplied)

iPod dock

CD

USB

TAPE

iPod connector

■ iPod playback

1 Press the ON/STAND-BY button to turn the power on.

2 Press the iPod button on the remote control or FUNCTION button repeatedly on the main unit to select iPod function.

3 Insert iPod unit in iPod dock of main unit.

4 Press the / button to start playback.

■ To disconnect iPod

Simply remove the iPod from the iPod dock. It is safe to do so even during playback.

■ Navigating the iPod menus

1 Press the MENU button to view the menu on iPod unit. Press it again to go back to previous menu.

2 Use the TUNING ( or ) button on the remote control to select an item on the menu and then press ENTER button.

Note:

When navigating the iPod menus with remote control, do not operate any of the buttons on the iPod unit. The volume level is adjusted by pressing the VOL (+ or –) button on the main unit or the remote control. Adjusting the volume on the iPod unit gives no effect.

iPod operation:

The operations described below depend on the generation iPod you are using.

System on operation:

When the main unit is powered on, the iPod unit will automatically power on when docked in the unit (including TIMER function/exclude USB function).

System off (stand-by operation):

When the main unit is turned to stand-by mode, the docked iPod unit will automatically turn to stand-by mode.

E-8