Sony CDP-C40, CD-PC50 manual Compact Disc Player

Cleaning the cabinet

Clean the cabinet, panel and controls with a soft cloth lightly moistened with mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

Cleaning discs

Before playing, clean the disc with the cleaning cloth. Wipe the disc from the center out.

Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for analog discs.

After playing, store the disc in its case.

COMPACT DISC PLAYER
System	Compact disc digital audio system
Laser	Semiconductor laser (X = 780 nm)
	Emission	duration: continuous
Laser output	Max. 44.6	_W*

*This outputis thevalue measuredat a distance of about 200mm from theobjectire lens surfaceonthe

Optical Pick-upBlock.

Frequency response

2 Hz - 20 kHz (-+0.5 dB) Signal to noise ratio

More than 100 dB

Dynamic range More than 88 dB

Harmonic distortion

Less than 0.C5% (1 kHz)

Channel separation

More than 95 dB (1 kHz)

Wow and flutter Below measurable limit

OutputsLINE OUT (phono jacks)

Output level 2 V (at 50 kilohms)

Load impedance over 10 kilohms HEADPHONES (stereo phone jack)

(CDP-CS0 only)

Output level 0 - 2.4 mW (variable) (at 32 ohms)

General

Power requirements

	120 V AC,60 Hz
Power consumption
	12W
Dimensions	Approx. 430 x 110 x 385 mm (w/hid)
	(17 x 431=x 15% inches)
	not including projeoting parts and controls
Weight	Approx. 5.7 kg (12 Ibs !0 oz), net

REMOTE COMMANDER (supplied only for the CDP-CS0) Remote control system

	Infrared control
Power requirements
	3 V DC with two size AA (R6) batteries
Dimensions	Approx. 61 x 20 x 150 mm (wlhld)
	(2Zl=x =Zl=lx 6 Inches)
Weight	Approx. 110 g (4 oz)
	Including batteries

SUPPLIED ACCESSORIES Audio signal connecting cord

(phono plug x 2.,--phone plug x 2) (t) CDP-CS0 on(y:

Sony SUM-3 (NS) batteries (2)

Design and specifications subject to change without notice.