1
2
Press PGM.
Press the DISC SELECT button which corresponds to the disc you want.
corresponds to the selection you want,
® _34s
:, | 'r,,i,,dTo program additional selections on a same |
disc, repeat step 3.
To program additional selections on another disc, repeat steps 2 and 3.
To return to normal play mode
PressPGMagain.
The maximum selection number which can be programmed On the disc in the DISC 1 tray; up to the 99th selection
On the disc in the other trays; up to the 30th selection
To display the total playing time of the program Press TIME before starting play•
0303""3 ", s | ,'a 36.2S_ |
To play the programmed selections
Press • (or • II on the main unit).
To insert a pause into your program
(possible only with the CDP.C50)
While programming, press II at a point between two selections• When the program is played and reaches this point, the disc will stop and stand by until you press II again.
This function allows you to change the tape when making a recording. A pause cannot be programmed first in the program line up.
I @®34s P 3
I | 2 3 4 5 6 7 _1 9 _ | _12 | 13 14 Is 15 |
P (pause) has been programmed, It is 3rd in the program line
up.
To display the time remaining in a selection
Press TIME once while the unit is in the play or pause mode. To return to normal display, press TIME once more.
To program while observing the disc labels
You can program the selections with tr_e disc compartment opera.
When s program is full
_JL) _Ir __appears and no more selections can be added.
Space between selections
There is a 3 second blank between each programmed selection. However, when consecutive selections (e.g. 4th - 5th) from one
disc are added to a program, the original amount of time between the selections is retained.
