NAT Mode Gateway LAN Interface, WAN Interface | Nintendo 2000

NAT Mode

Gateway LAN Interface

•IP Address

Gateway private NAT IP address

•Subnet

Gateway private NAT subnet mask

WAN Interface

•IP Address

Cable Modem IP address (private Cable RF network)

•Subnet

Cable Modem IP subnet mask

Submit

•Click “Submit” to change displayed parameters

Reset

•Click “Reset” to use displayed parameters, cable modem will reset.

User’ Guide

71

Image 71

Nintendo 2000 manual NAT Mode Gateway LAN Interface, WAN Interface, Submit, Reset

Contents

Orion Contents Nvram Tftp Mode of Operation Contact Your Local Cable Operator Understand the Cable Modem’s Features Not Supplied Prepare Your Area for Cable Modem InstallationGather Supplied and Required Items Supplied Installing the Software Drivers Before Hardware Connection Installing the Cable Modem Using the USB PortPage Page Installing the Software Drivers Installing the Hardware User’ Guide User’ Guide Page Page Page User’ Guide Page Click Yes to restart the computer User’ Guide Page Page Page Page Page Click Finish to complete the installation User’ Guide None of the LEDs is on when I power on the LAN Cable Modem Troubleshooting the USB Installation Select USB Composite Device and click Remove Click Refresh Uninstalling the USB Driver Installing the Modem Using the Ethernet Port Enet LED on my cable modem is not lit Troubleshooting the Ethernet InstallationNone of the LEDs are on when I power on the Cable Modem Page LEDs on the Front of the Modem Cable Modem LEDs and Connectors Connectors on the Back of the Modem Getting Help Telnet commands CMshow ? CMshow interTab CMshow interface Redisplaying a command Debug Ping Image User-Level PasswordTracert Show CMshow interface ethernet ¾ show interfaceCMshow interface ? ¾ show interface ethernet CMshow interface usb CMshow running-config¾ show interface usb Qpsk ¾ show cpe-limit ¾ show cpe-info Display CPE information ¾ show upstream CMshow cpe-limit¾ show downstream Display downstream information CMshow downstream ¾ show rip ¾ show nat configCMshow nat config ¾ show nat timer ¾ show pppoe-forwarding Display PPPoE enable or disable CMshow nat timer¾ show access-list CMshow access-list Host-name ¾ dhcp ip-pool delete ¾ host-name delete Delete host-nameCustomer-123host-name delete CM dhcp ip-pool 192.168.10.2 CMshow dhcp ¾ dhcp reserve-mac delete 1-16all ¾ dhcp gateway ip address Set local Dhcp gateway ip address CMnat static ipmapping add 64.168.39.3 ¾ dhcp dns delete 1~4/allOne to one mapping ¾ nat static ipmapping delete index/all Port forwarding setting NAT static ip CMnat static ip disableCMnat static ip enable CMnat static portmapping delete CMnat static gateway Interfaces ¾ interface cable upstream channel id ¾ interface ethernet startup ¾ interface usb startup ¾ interface cable rip send-version¾ interface cable startup ¾ interface usb shutdown ¾ rip version 1/2/2b ¾ rip timer response 10-65535 second¾ rip silence-mode enable/disable CMrip key-chain 1 1 start-time 2002-04-20 ¾ rip defaultCMrip key-chain 1 1 key-string abcdefg ¾ web-access password string Set web-access password Access-list CMcopy tftpconfig 68.5.203.15 4ips.txt CMaccess-list 21 permit 192.168.100.10¾ access-list delete list IDall ¾ pppoe-forwarding enabledisable ¾ write ¾ reset¾ snmp community ¾ snmp community string ro ¾ ip nat enable Bridge modeNAT mode ¾ ip route enable Routing mode ¾ ip natroute enable NAT/Routing mode Web User Interface Home Accessing the Web User Interface Cable Modem Information Cable Modem Status Downstream Upstream Upstream Burst Operation Parameters Event Log Bridge Mode Router/NAT configuration Submit NAT Mode Gateway LAN InterfaceReset WAN Interface Router Mode Routing Protocol LAN Interface Delete Key ChainAdd NAT Router Mode Routing Protocol Gateway LAN Interface Authentication mode Authentication Key Chain Reset Gateway LAN Setup Page Docsis configuration file Vsif tag support