Enable/disable silence mode. If set, the cable router just listen RIP message, it doesn’t send any RIP message out.
¾rip key-chain{1 2}{0..32767} key-string{a..zA..Z0..9} Set RIP authentication key string for key-chain & Key ID
key-chain number: select key-chain1 or key-chain2
key-id:Key ID number, range between 0..32767.
key-string:Key content, the key length must not exceed 16 bytes.
Example:
CM>rip key-chain 1 1 key-string abcdefg
Set key-chain 1, key ID 1, with key string to “abcdefg”
¾rip key-chain{12}{ 0..32767} start-time{yyyy-mm-dd}{hh:mm:ss} Set RIP authentication start time for key-chain specified.
Example:
CM>rip key-chain 1 1 start-time 2002-04-20 15:30:00
Set key-chain 1, key ID 1, with start time to 2003/04/20 15:30:00
¾rip key-chain{12}{1..32767} expire-time[{yyyy-mm-dd}{hh:mm:ss}infinite] Set key expire time, default value is infinite.
Example:
CM>rip key-chain 1 1 expire-time 2002-06-01 18:00:00 Set expire time at 2003-06-01 18:00:00
¾rip key-chain {12}{1..32767} delete
Delete a key from specified key-chain and key ID.
¾rip default
Set all RIP parameters to default.
Web-access
¾web-access cpe {enabledisable}
