Nintendo 2000 manual ¾ interface ethernet startup, ¾ interface cable upstream channel id

¾interface ethernet mac-address {mac address} Assign MAC address to ethernet interface.

Example:

CM>interface ethernet mac-address 0008.0E86.1118

CM>show interface ethernet

Interface Ethernet

MAC address: 0008.0E86.1118

IP address 192.168.100.1 subnet-mask 255.255.255.224

Link status: link

Mode: 100Mbps, full-duplex

¾interface ethernet rip {enabledisable} Enable/disable RIP on ethernet interface.

¾interface ethernet rip send-version {12}

Set RIP version 1 or version 2 on ethernet interface.

¾interface ethernet rip key-chain {12none} Set RIP key-chain to 1, 2, or none.

¾interface ethernet rip auth-mode { none md5 text} Set RIP authentication mode to none, md5, or text.

¾interface ethernet shutdown

Stop transmitting traffic on the ethernet interface.

¾interface ethernet startup

Start transmitting traffic on the ethernet interface.

¾interface cable upstream channel {id}

Change upstream channel ID.

¾interface cable downstream preset {frequency} Add frequency to downstream frequency preset table.

¾interface cable rip {enabledisable} Enable/disable RIP on cable interface.

User’ Guide 52