Debug
¾debug
Display corresponding message, the protocol debug just show packet information send to or receive from RF interface.
CM>debug ? |
|
console | Display console message |
ip | IP information |
dhcp | DHCP protocol information |
arp | ARP information |
l2 | Layer 2 information |
nat | NAT translation information |
CM>debug ip ? | |
tcp | TCP information |
udp | UDP information |
icmp | ICMP information |
rip | RIP protocol information |
Example:
CM>debug ip tcp
TCP: rcvd src:10.0.0.3(1150) dst:172.17.100.134(23) chksum:F368
TCP: Seq#:1711689473 Ack#:1591494822 dataOffset:20 Flags:10(h)
TCP: rcvd src:172.17.100.134(23) dst:10.0.0.3(1150) chksum:7587
TCP: Seq#:1591494822 Ack#:1711689473 dataOffset:20 Flags:18(h)
TCP: rcvd src:10.0.0.3(1150) dst:172.17.100.134(23) chksum:F368
TCP: Seq#:1711689473 Ack#:1591494977 dataOffset:20 Flags:10(h)
TCP: rcvd src:172.17.100.134(23) dst:10.0.0.3(1150) chksum:DC13
Undebug
¾undebug
Disable debug function
CM>undebug ?
console | Disable console message |
ip | IP information |
dhcp | DHCP protocol information |
arp | ARP information |
l2 | Layer 2 information |
nat | NAT translation information |
User’ Guide | 34 |
