Nintendo 2000 specs

CAUTION: You must verify that Ambit USB Cable Modem appears on the screen. If USB Composite Device appears, you must click Back twice and specify the correct location of the driver files. DO NOT proceed if USB Composite Device is displayed in the above window. Contact your cable provider for further assistance.

6.Click Next. The computer automatically installs the necessary driver files. You may see the following screen

User’ Guide

13

Image 13

Nintendo 2000 manual

Contents

Orion Contents Nvram Tftp Mode of Operation Contact Your Local Cable Operator Understand the Cable Modem’s Features Gather Supplied and Required Items Prepare Your Area for Cable Modem InstallationSupplied Not Supplied Installing the Software Drivers Before Hardware Connection Installing the Cable Modem Using the USB PortPage Page Installing the Software Drivers Installing the Hardware User’ Guide User’ Guide Page Page Page User’ Guide Page Click Yes to restart the computer User’ Guide Page Page Page Page Page Click Finish to complete the installation User’ Guide None of the LEDs is on when I power on the LAN Cable Modem Troubleshooting the USB Installation Select USB Composite Device and click Remove Click Refresh Uninstalling the USB Driver Installing the Modem Using the Ethernet Port None of the LEDs are on when I power on the Cable Modem Troubleshooting the Ethernet InstallationEnet LED on my cable modem is not lit Page LEDs on the Front of the Modem Cable Modem LEDs and Connectors Connectors on the Back of the Modem Getting Help Telnet commands CMshow ? CMshow interTab CMshow interface Redisplaying a command Debug Ping Image Tracert PasswordUser-Level Show CMshow interface ? ¾ show interface¾ show interface ethernet CMshow interface ethernet ¾ show interface usb CMshow running-configCMshow interface usb Qpsk ¾ show cpe-limit ¾ show cpe-info Display CPE information ¾ show downstream Display downstream information CMshow cpe-limitCMshow downstream ¾ show upstream CMshow nat config ¾ show nat config¾ show nat timer ¾ show rip ¾ show access-list CMshow nat timerCMshow access-list ¾ show pppoe-forwarding Display PPPoE enable or disable Host-name Customer-123host-name delete ¾ host-name delete Delete host-nameCM dhcp ip-pool 192.168.10.2 CMshow dhcp ¾ dhcp ip-pool delete ¾ dhcp reserve-mac delete 1-16all ¾ dhcp gateway ip address Set local Dhcp gateway ip address One to one mapping ¾ dhcp dns delete 1~4/allCMnat static ipmapping add 64.168.39.3 ¾ nat static ipmapping delete index/all Port forwarding setting CMnat static ip enable CMnat static ip disableCMnat static portmapping delete NAT static ip CMnat static gateway Interfaces ¾ interface cable upstream channel id ¾ interface ethernet startup ¾ interface cable startup ¾ interface cable rip send-version¾ interface usb shutdown ¾ interface usb startup ¾ rip silence-mode enable/disable ¾ rip timer response 10-65535 second¾ rip version 1/2/2b CMrip key-chain 1 1 key-string abcdefg ¾ rip defaultCMrip key-chain 1 1 start-time 2002-04-20 ¾ web-access password string Set web-access password Access-list ¾ access-list delete list IDall CMaccess-list 21 permit 192.168.100.10¾ pppoe-forwarding enabledisable CMcopy tftpconfig 68.5.203.15 4ips.txt ¾ snmp community ¾ reset¾ snmp community string ro ¾ write NAT mode Bridge mode¾ ip nat enable ¾ ip route enable Routing mode ¾ ip natroute enable NAT/Routing mode Web User Interface Home Accessing the Web User Interface Cable Modem Information Cable Modem Status Downstream Upstream Upstream Burst Operation Parameters Event Log Bridge Mode Router/NAT configuration Reset NAT Mode Gateway LAN InterfaceWAN Interface Submit Router Mode Routing Protocol LAN Interface Add Key ChainDelete NAT Router Mode Routing Protocol Gateway LAN Interface Authentication mode Authentication Key Chain Reset Gateway LAN Setup Page Docsis configuration file Vsif tag support