Operation Parameters | Nintendo 2000 specs

Operation Parameters

User’ Guide

68

Image 68

Nintendo 2000 manual Operation Parameters

Contents

Orion Contents Nvram Tftp Mode of Operation Understand the Cable Modem’s Features Contact Your Local Cable Operator Prepare Your Area for Cable Modem Installation Gather Supplied and Required ItemsSupplied Not Supplied Installing the Cable Modem Using the USB Port Installing the Software Drivers Before Hardware ConnectionPage Page Installing the Hardware Installing the Software Drivers User’ Guide User’ Guide Page Page Page User’ Guide Page Click Yes to restart the computer User’ Guide Page Page Page Page Page Click Finish to complete the installation User’ Guide Troubleshooting the USB Installation None of the LEDs is on when I power on the LAN Cable Modem Uninstalling the USB Driver Select USB Composite Device and click Remove Click Refresh Installing the Modem Using the Ethernet Port Enet LED on my cable modem is not lit Troubleshooting the Ethernet InstallationNone of the LEDs are on when I power on the Cable Modem Page Cable Modem LEDs and Connectors LEDs on the Front of the Modem Connectors on the Back of the Modem Telnet commands Getting Help CMshow interTab CMshow interface Redisplaying a command CMshow ? Debug Image Ping User-Level PasswordTracert Show ¾ show interface CMshow interface ?¾ show interface ethernet CMshow interface ethernet CMshow interface usb CMshow running-config¾ show interface usb Qpsk ¾ show cpe-info Display CPE information ¾ show cpe-limit CMshow cpe-limit ¾ show downstream Display downstream informationCMshow downstream ¾ show upstream ¾ show nat config CMshow nat config¾ show nat timer ¾ show rip CMshow nat timer ¾ show access-listCMshow access-list ¾ show pppoe-forwarding Display PPPoE enable or disable Host-name ¾ host-name delete Delete host-name Customer-123host-name deleteCM dhcp ip-pool 192.168.10.2 CMshow dhcp ¾ dhcp ip-pool delete ¾ dhcp gateway ip address Set local Dhcp gateway ip address ¾ dhcp reserve-mac delete 1-16all CMnat static ipmapping add 64.168.39.3 ¾ dhcp dns delete 1~4/allOne to one mapping Port forwarding setting ¾ nat static ipmapping delete index/all CMnat static ip disable CMnat static ip enableCMnat static portmapping delete NAT static ip Interfaces CMnat static gateway ¾ interface ethernet startup ¾ interface cable upstream channel id ¾ interface cable rip send-version ¾ interface cable startup¾ interface usb shutdown ¾ interface usb startup ¾ rip version 1/2/2b ¾ rip timer response 10-65535 second¾ rip silence-mode enable/disable CMrip key-chain 1 1 start-time 2002-04-20 ¾ rip defaultCMrip key-chain 1 1 key-string abcdefg Access-list ¾ web-access password string Set web-access password CMaccess-list 21 permit 192.168.100.10 ¾ access-list delete list IDall¾ pppoe-forwarding enabledisable CMcopy tftpconfig 68.5.203.15 4ips.txt ¾ reset ¾ snmp community¾ snmp community string ro ¾ write ¾ ip nat enable Bridge modeNAT mode Routing mode ¾ ip route enable NAT/Routing mode ¾ ip natroute enable Accessing the Web User Interface Web User Interface Home Cable Modem Information Cable Modem Status Downstream Upstream Upstream Burst Operation Parameters Event Log Router/NAT configuration Bridge Mode NAT Mode Gateway LAN Interface ResetWAN Interface Submit Router Mode Routing Protocol LAN Interface Delete Key ChainAdd NAT Router Mode Routing Protocol Gateway LAN Interface Authentication mode Authentication Key Chain Reset Gateway LAN Setup Page Docsis configuration file Vsif tag support