Sony CD-PC50, CDP-C40 Disc Press Corresponding Disc Select button, Locating a selection directly

ByusingtheDISCSELECTbuttonsortheDISCSKIPbutton duringplay,youcanlocatethebeginningofanydisc.

Toselect a particular	disc	Press the
		corresponding DISC
		SELECT button.
To move to the disc	tray next	Press DISC SKIP.
to the current one

Locating a point in sequence (Manual Search)

You can locate a particular point in a selection during play by monitoring the high-speed sound.

To go back at high speed
To go ahead at high speed	Keep <1<1pressed.

Release the button when you reach the point in tile selection you want.

Locating a selection in sequence (Automatic Music

Sensor)

You can locate the beginning of a selection on the disc being played.

To locate the beginningof the
selectionbeingPlayed	Press _ once.
To locatethe beginning of the
nextselection.	Press IH_ once.

Continue to press until the selection you wanted has been located.

Locating a selection directly

(possible only when using the remote commander of the CDP-C50)

Press the numeric buttons (1 to 10) to enter the desired track number.

To choose directly • selection whose number Is greater than 10 (possible only when using the remote commander of the CDP-CSO)

Use the [_ button and [] to [] buttons.

Ex. To play from track NO. 32		Ex. To play		from track No. 30
1	Press +_threetimes.	1	Press[_	twice.
2	Press_].	2	Press[].

If, within approx. 5 seconds, no button is pressed after [_], [_ will function as the _]button

What is this Indication?

"- - - -" indication will appear in the display window instead of numbers, if a selection numbered 21 or higher is selected.

To locate at high speed

Press <HI or _ in the pause mode. Search speed will increase three times, but there will be no sound. Find the desired point by watching the numbers in the display.