Adjusting the PDP Display
Note
•The direct button on the remote control is the 'SOURCE' button.
Edit Name
MENU → ENTER → [Input] → → ENTER → [Edit Name] → , → ENTER
Name the input device connected to the input jacks to make your input source selection easier.
VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game / Camcorder / DVD Combo / DHR / PC
Note
•When connecting a PC to the HDMI or DVI terminal, set Edit Name to PC.
•In other cases, set Edit Name to AV.
•However, since 640x480, 720P (1280x720), and 1080p (1920x1080) are common signals for AV and PC, make sure to set the Edit Name in accordance with the input signal.
•The Picture menu changes depending on the input signal and Edit Name.
Picture [PC / DVI / HDMI / MagicInfo Mode]
Available Modes
• PC / DVI / HDMI
• AV
• MagicInfo
• TV
Note
•The TV menu is available when a TV tuner box is installed.