Specifications
AUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL
HARMONIC DISTORTION
23.2watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 5% total harmonic distortion.
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
22 watts per channel minimum continuous average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 5% total harmonic distortion.
Tuner section
FM
Tuning range | 87.5 - 107.9 MHz |
Antenna terminal | External antenna connector |
Intermediate frequency | |
| 10.7 MHz/450 kHz |
Usable sensitivity | 9 dBf |
Selectivity | 75 dB at 400 kHz |
67 dB (stereo), | |
| 69 dB (mono) |
Harmonic distortion at 1 kHz | |
| 0.5 % (stereo), |
| 0.3 % (mono) |
Separation | 35 dB at 1 kHz |
Frequency response | 30 - 15,000 Hz |
AM |
|
Tuning range | 530 - 1,710 kHz |
Antenna terminal | External antenna connector |
Intermediate frequency | |
| 10.7 MHz/450 kHz |
Sensitivity | 30 ∝V |
CD player section
120 dB | |
Frequency response | 10 - 20,000 Hz |
Wow and flutter | Below measurable limit |
Power amplifier section
Outputs | Speaker outputs |
| (sure seal connectors) |
Speaker impedance | 4 - 8 ohms |
Maximum power output | |
| |
| 52 W ⋅ 4 (at 4 ohms) |
| |
| 45 W ⋅ 4 (at 4 ohms) |
General
Outputs | Audio outputs terminal | ||
| (rear/sub switchable) | ||
| Power antenna relay control | ||
| terminal |
|
|
| Power amplifier control | ||
| terminal |
|
|
Inputs | Antenna input terminal | ||
Tone controls | Low: |
|
|
| ±10 dB at 60 Hz | ||
| Mid: |
|
|
| ±10 dB at 1 kHz | ||
| High: |
|
|
| ±10 dB at 10 kHz | ||
Power requirements | 12 V DC car battery | ||
| (negative ground) |
| |
Dimensions | Approx. 178 ⋅ | 50 ⋅ | 176 mm |
| (7 1/8 ⋅ 2 ⋅ 7 in.) |
| |
| (w/h/d) |
|
|
Mounting dimensions | Approx. 182 ⋅ | 53 ⋅ |
|
| 161 mm | ||
| (7 1/4 ⋅ 2 1/8 ⋅ | 6 3/8 in.) | |
| (w/h/d) |
|
|
Mass | Approx. 1.2 kg |
| |
| (2 lb 10 oz) |
|
|
Supplied accessories | For the | ||
| X204/X144/X104: |
| |
Parts for installation and connections
Front panel case (1)
For the
Design and specifications are subject to change without notice.
14