OTHER FUNCTIONS

(PUSH-MENU)(SOURCE)

(SEEK)(+)/(SEEK)(–)AUX

Using auxiliary equipment

You can listen to equipment (such as a cassette, MD, or MP3 portable player) connected to the unit. Refer to the operating instructions for the corresponding equipment for more detailed information.

Be sure to remove the inserted CD to prevent possible damage to the unit before connecting the equipment.

1Connect a cassette/MD/MP3 portable player or other equipment to the unit’s AUX jack (3.5 mm dia.).

2Press (SOURCE) repeatedly until “AUX” appears on the display.

Various settings

To align the sound levels (Sour ce Level Adjustor)

Volume may vary each time you change the source mode. In this case, you can align each source mode’s volume to almost the same level.

1Select the source mode to be adjusted.
2Press and hold (SOURCE) until “LEVEL 0” appears on the display.
3Turn (PUSH-MENU)to adjust the level.

The volume level is adjustable from –6 to +6 dB by 1 dB steps.

To change the display and beep tone settings

You can set the dimmer of the display, change the display illumination color (only for the CDC-X144 and CDC-X104), and turn on or off the VU level meter and the beep tone.

Proceed as follows while the unit is turned on. There are items that cannot be selected if you operate when the unit is deactivated.

1Press and hold (PUSH-MENU)until “SET” appears on the display.

2Press (SEEK) (+) or (SEEK) (–) to select “DIM,” “VU,” “BEEP” or “ILM*1.”

Each time you press (SEEK) (+), the item changes as follows:

DIM (dimmer) t
VU (VU level meter) t A.SCRL*2 t
BEEP (beep tone) t ILM (illumination color)*1

*1 Only for the CDC-X144 and CDC-X104

*2 Auto Scroll, available when source is CD (page 8)

3Turn (PUSH-MENU)to change the setting for the selected item.
To select the type of equipment connected to the r ear panel

You can connect a power amplifier or a sub-woofer to the AUDIO OUT REAR jacks on the rear of the unit.

When a power amplifier or a sub-woofer is connected, select the type of the connected equipment correctly.

1While the unit is deactivated (clock or DEMO is diplayed), press (PUSH-MENU).

2Turn (PUSH-MENU)to select “REAR” (for a power amplifier) or “SUB” (for a sub- woofer).

9