Playing CDs
Locating a Specific Disc≠AMS ± +100JOG
+100
I / u
MEMO SEARCH
DISC
Number buttons
>10 | ENTER |
MEMO SCAN
·
Locating a disc on the player
Turn the JOG dial until the desired disc number or Disc Memo (see page 24) appears in the display. Push the JOG dial to start play.
To skip discs quickly
Press +100. Each time you press +100, the player skips 100 discs.
Locating a disc directly using the remote 
1Press DISC.
2Press the number button of the disc.
Example: To enter number 35 Press 3 then 5.
To enter number 100 Press 1, then 10/0 twice.
3Press ENTER to start play.
Locating a disc by scanning each Disc Memo (Memo Scan) Z
You can locate a desired disc to play quickly by scanning the Disc Memos (see page 24) in the display . Note that you cannot use this function in the ALL DISCS Shuffle Play mode.
1Press MEMO SCAN.
“MEMO SCAN” appears in the display, and the Disc Memos scroll in the display.
2Press ·when the Disc Memo of the desired disc to play appears.
The disc is set to the playing position, and the player starts playing.
In Program Play mode, the disc will be added to the end of the program if you press ENTER instead of ·.
Note
If “NO ENTRY” appears in the display, no disc has been labeled with the Disc Memo. Try the Memo Scan function again after labeling the discs.