OTHERS

Functions of control

terminals

Control terminal (CTRL-S)

– mini jack

The control terminal of this unit allows external control by connecting system controler equipped with CTRL-S terminal to the unit or with the attached remote control.

Controllable functions

Same as those of attached remote control. When a plug is connected to control S terminal, receiving infrared ray function stops.

Functions of REMOTE terminal

RELAY PLAY

– stereo mini jack terminal

When you connect the unit to the other CDP-D11, they play back automatically in succession after playing back at the unit finishes by receiving control signal via RELAY terminal.

Relay play

This function enables players to play back continuously by connecting the unit to the other CDP-D11.

When you connect them in loop, continuous repeat play is possible.

Connection for relay play

Connect “RELAY OUT” of the unit to “RELAY IN” of the connected player with stereo mini plug cable (RK-G136, etc.).

When you connect more than two players, connect “RELAY OUT” and “RELAY IN” as well.

Note

To operate relay play properly, you need two systems of control signal.

Be sure to use a stereo type plug cable.

To the mixer

1Playbacks at the first player.

2After the first player finishes playback, the second player starts playback.

3If the other player’s cables are connected via RELAY IN terminal, they play back in turn after the previous player’s playback finishes.

Notes

All of following conditions are required to make the connected players start playback by receiving relay control signal.

•Discs which can playback are set.

•Players are set in STOP mode.

•Not to be set in MENU mode.

When REPEAT is set, the Relay play is not carried out as control signals are not output.

RS-232C

– D-sub 9 pin (male)

External control is possible.

On control protocols, please consult dealers.

18