OTHERS

Treatment of compact

discs

How to treat

•Not to touch the side without label (playing side).

•Do not stick any paper or seal.

•Do not use a disc sticked with seals or pastes such as a secondhand disc or a rental disc.

Such a disc may not be ejected by sticking to inside, or may be a cause of trouble of the unit.

Preservation

•Do not leave discs in the places such as of high temperature or high humidity, especially under the direct sunlight.

•Store a disc in its case. If the discs are piled up or standed without cases, they may become deformed.

Cleaning

•Fingerprints or dusts make the sound quality worse. Keep the disc clean.

•To clean the disc, wipe it from the center out with a soft cloth.

•If the disc is extremely dirty, use a soft cloth lightly moistened with water, then wipe it with a dry cloth.

•Do not use benzine, record cleaner or medicine for preventing static electricity as these could damage the disc.

Troubleshooting guide

If you experience any of the following difficulties while using the player, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer.

If “Disc Error” is displayed

/It shows an unusual status in installing the disc or the disc itself.

Remove the disc and check it.

There is no sound.

/The connection cord is not connected firmly.

/The amplifier is not operated correctly.

/The PHONE LEVEL control is turned toward 0. Turn it to right to increase the volume.

/The AC cord is not connected firmly.

The unit does not play.

/No disc is inside.

/The disc is inserted upside down.

/The disc is inserted inclined.

/The disc is dirty.

/The unit has condensation inside. Remove the disc, and leave the unit for about an hour, then turn on and try to operate again.

The remote control does not work.

/There is an object between the unit and it.

/It is not directed to the sensor on the main unit.

/Replace the batteries with new ones.

/Only the cable is connected to CTRL-S.

The unit does not function correctly.

/The operation mechanism is not working correctly. Turn off the power, then turn on again.

If the unit does not work correctly by any of the operations above, disconnect the AC cord, then connect it again.

21