Parallel input/output
D-sub 9 pin (female)
When a simple circuit is connected to the parallel in/ out terminals, remote control is available.
By connecting input terminal and GND, each function assigned to each terminal can work.
These output terminals are open collector output. The LEDs can be lit on to show the status of the unit.
Circuit examples for input/output terminals
<Example of output circuit> <Example of input circuit>
OTHERS
The user setting of the function of each pin is set as follows.
1In stop mode, press MENU/EXIT button to display “MENU Mode”.
2Turn the AMS control to display “Parallel”, then press the AMS control.
3Turn the AMS control to display “User”, then press the AMS control.
4Turn the AMS control to display the pin name (“P.Input1” “P.Output1” for example), then press the AMS control.
5Turn the AMS control to display the desired function, then press the AMS control.
6Press the MENU/EXIT button.
Output terminals (7th to 9th)
GND (6th)
Input
GND (6th)
Repeat steps 4 and 5 for each pin.
When the user setting of parallel select has already been selected, carry out from step 4.
PIN1 to PIN5 (input terminals)
PLAY/PAUSE The same function as PLAY/PAUSE in the main unit |
By the parallel select of the MENU Mode, either the standard setting (Preset) or the user setting (User) can be selected.
The following chart shows inputs/outputs of the terminals and functions of the standard settings.
Pin number | Input/output | Function | Names in MENU Mode |
|
|
|
|
1 | Input | PLAY | PIN1 |
|
|
|
|
2 | Input | PAUSE | PIN2 |
|
|
|
|
3 | Input | STOP | PIN3 |
|
|
|
|
4 | Input | AMS+ | PIN4 |
|
|
|
|
5 | Input | AMS– | PIN5 |
|
|
|
|
6 | GND |
| |
|
|
|
|
7 | Output | PLAY | POUT1 |
|
|
|
|
8 | Output | PAUSE | POUT2 |
|
|
|
|
9 | Output | NO DISC | POUT3 |
|
|
|
|
Pin number
In the user setting, the following functions can be assigned to PIN1 to PIN5, to POUT1 to POUT3 in the MENU Mode.
Input/output of each pin is fixed.
PLAY | The same function as PLAY in the remote control |
PAUSE | The same function as PAUSE in the remote control |
|
|
STOP | The same function as STOP in the main unit |
|
|
AMS+ | The same function as AMS+ in the remote control |
|
|
AMS– | The same function as AMS- in the remote control |
|
|
FF | The same function as FF in the main unit |
|
|
REW | The same function as REW in the main unit |
|
|
MARK | The same function as MARK in the remote control |
|
|
LOCATE | The same function as LOCATE in the remote control |
|
|
EJECT | The same function as EJECT in the main unit |
|
|
Fader PLAY | Carry out the fader play |
|
|
1 Track PLAY– | The same function as Number buttons |
20 Track PLAY | remote control |
|
|
OFF | No operation |
How to use Fader PLAY
By connecting the fader of the mixer to the terminal on the
This can be used in the mixer equipped with fader remote function in which
19