Sony CDP-D11 3 Insert the disc, 2 Turn on this unit, 4 Press the ßbutton, Basic playback operation, 1 Turn on the mixer and adjust fader or level of the connected channel

Basic playback operation

Playback

2 3 4

LOCATE

MENU/EXITDISPLAY

A CUE VARI

SPEED

PUSH MARK/ENTER

zTo use the headphones

Connect headphones to PHONE jack in the front panel.

Adjust the volume by PHONE LEVEL control.

zPlayback can be started in step 4 by selecting a tracknumber.

1Turn the AMS control until the desired track number is displayed.

(To use the remote control, press the =or +button.)

2Press the AMS control or the ßbutton.

zEjecting function can be turned not to work to avoid ejecting the disc by mistake during playback or pause mode.

1Press the MENU/EXIT button in stop mode to display “MENU Mode”.

2Turn the AMS control until “PLAY/PAUSE” is displayed, then press the AMS control.

3Turn the AMS control until “EJECT Disable” is displayed, then press the AMS control.

4Press the MENU/EXIT button.

To change so that ejecting function is always workable, select “EJECT Enable” in step 3.

1 Turn on the mixer and adjust fader or level of the connected channel.2 Turn on this unit.3 Insert the disc.

8cm disc can be played without adapter.

Label side up

4 Press the ßbutton.

Playback starts.

What to be	Operation
To stop playback	Press p.
To pause playback	Press ß.
	(Playback starts by pressing it again.)
To skip to the next track	Turn AMS to right.
	(Press +in the remote control.)
To return to the previous	Turn AMS to left.
track	(Press =in the remote control.)
To eject the disc	Press ¤EJECT.

6