Sony CDP-D11 cord, 2 Connect the cord, 1 Prepare the necessary connecting, 3 Connect the AC power cord to the wall outlet, Position, Output level, wired remote control

Preparations

z To use the supplied remote control as the		Position	Output level
wired remote control		Position	Output level
wired remote control
Connect the terminal on the front side of the remote		+4dBu	The signal of -20dB in digital is
control and the CONTROL terminal of the main unit		+4dBu	The signal of -20dB in digital is
control and the CONTROL terminal of the main unit			output in +4dBu level.
with the CONTROL S cord (supplied).			output in +4dBu level.
with the CONTROL S cord (supplied).
When the remote control and the main unit is		-10dBu	The signal of -20dB in digital is
connected with the CONTROL S cord, the infrared ray		-10dBu	The signal of -20dB in digital is
connected with the CONTROL S cord, the infrared ray			output in -10dBu level.
is not set out from the remote control and is not			output in -10dBu level.
is not set out from the remote control and is not
received at the main unit.		Specification of the BALANCE output
To use as the wireless remote control, disconnect the		Specification of the BALANCE output
plugs from both the main unit and the remote control.		connector.
1 Prepare the necessary connecting			Equivalent to XLR-3-32
1 Prepare the necessary connecting			output terminal
cord.			1: GND
• Audio connecting cord (pin type)			2: HOT
• Audio connecting cord (pin type)			3: COLD
			3: COLD
White	White	p To connect to a digital equipment
Left (L)	Left (L)	p To connect to a digital equipment
		(MD recorder, DAT recorder, mixer with
Right (R)	Right (R)	digital input terminal, etc.)
Right (R)	Right (R)	Digital recording can be carried out by
Red	Red	Digital recording can be carried out by
Red	Red	connecting to MD or DAT recorder. Use
• Audio connecting cord XLR type		connecting to MD or DAT recorder. Use
• Audio connecting cord XLR type		coaxial digital connecting cable VMC-10
		coaxial digital connecting cable VMC-10
		(optional) or optical digital connecting cable
• Coaxial digital connecting cable VMC-10, etc.		POC-15A (optional), etc.
• Coaxial digital connecting cable VMC-10, etc.
		• When using coaxial digital cable
• Optical digital connecting cable POC-15A, etc.		CD player	Digital equipment
• Optical digital connecting cable POC-15A, etc.
• Control S cord (supplied)		DIGITAL OUT
(Mini jack)	(Mini jack)
• Relay playback cord (RK-G136, etc.)		: Flow of the signals
(Stereo mini jack)	(Stereo mini jack)	• When using optical digital connecting cable
		CD player	Digital equipment

2 Connect the cord.

DIGITAL OUT

pTo connect to an analog equipment

Use the terminals and switch as below.

Analog output terminal	Analog output terminal	: Flow of the signals
UNBAL (pin type)	BAL (XLR type)

3 Connect the AC power cord to the wall outlet.

OUTPUT LEVEL switch

zWhen BALANCE output (XLR type) terminal is used, output level can be changed by OUTPUT LEVEL switch.