Memorising only the desired stations
You can store up to 6 stations on each band (18 for FMI, FMII and FMIII, 6 for each MW and LW) in the order of your choice.
1 Press (SOURCE) repeatedly to select the tuner.
2 Press (MODE) repeatedly to select the band.
3 Press either side of (SEEK/AMS) to tune in the station that you want to store on the number button.
4 Press the desired number button ((1) to
(6)) for two seconds until “MEM” appears.
The number button indication appears in the display.
Note
If you try to store another station on the same number button, the previously stored station will be erased.
Receiving the memorised stations
1 Select the desired band (page 6).
2 Press the number button ((1) to (6)) momentarily where the desired station is stored.
If you cannot tune in a preset station
Press either side of (SEEK/AMS) momentarily to search for the station (automatic tuning).
Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received.
Note
If the automatic tuning stops too frequently, press (SENS) momentarily until “LCL” appears in the display (local seek mode). Only the stations with relatively strong signals will be tuned in.
Tip
If you know the frequency of the station you want to listen to, press and hold either side of (SEEK/AMS) for two seconds until the desired frequency appears (manual tuning).
If FM stereo reception is poor
—Monaural Mode
Press (SENS) momentarily until “MONO” appears.
The sound improves, but becomes monaural (“ST” disappears).
To go back to the normal mode, press again until “MONO” disappears.
Changing the displayed items
Each time you press (DSPL), the items alternate between the frequency and time.
EN
CD Player/Radio
7
Actual total number: | Sony |
|
|
