Press (SHIFT).

Adjusting the sound characteristics

You can adjust the bass, treble, balance and fader.

Each source can store the bass and treble levels respectively.

1 Select the item you want to adjust by pressing (SOUND) repeatedly.

VOL (volume) nBAS (bass) n

TRE (treble) nBAL (left-right) n

FAD (front-rear)

2 Adjust the selected item by rotating the dial.

Adjust within three seconds after selecting the item. (After three seconds, the dial functions as the volume control.)

EN

Attenuating the sound

Press (ATT) on the rotary commander. “ATT-ON” flashes momentarily.

To restore the previous volume level, press (ATT) again.

Tip

The unit decreases the volume automatically when a telephone call comes in (Telephone-ATT function).

Changing the sound and display settings

You can set: •CLOCK (page 6).

•CT (Clock Time) (page 14).

•D.INFO (Dual Information) to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF).

•BEEP to turn on or off the beeps.

•RM (Rotary Commander) to change the operative direction of the controls of the rotary commander.

—Select “NORM” to use the rotary remote as the factory-set position.

—Select “REV” when you mount the rotary remote on the right side of the steering column.

1

2 Press (2) (SET UP) repeatedly until the desired item appears.

Each time you press (2) (SET UP), the item changes as follows:

CLOCK nCT nD.INFO* nBEEP nRM

*When you have not tune the station or there is no CD being played, these items will not appear.

Note

The displayed item will differ depending on the source.

3 Press (4) (n) to select the desired setting (for example: ON or OFF).

4 Press (SHIFT).

After the mode setting is complete, the display goes back to normal playback mode.

16