Boosting the bass sound — D.bass

You can enjoy clear and powerful bass sound. The D-bass function boosts the low frequency signal with a sharper curve than conventional bass boost.

You can hear the bass line more clearly even if the vocal sound is the same volume. You can emphasize and adjust the bass sound easily with the D-bass control. This effect is similar to the one you get when you use an optional subwoofer system.

Moreover, the Digital D-bass*function creates even sharper and more powerful bass sound than Analog D-bass.

*Digital D-bass is available during CD playback.

 

 

Digital D-BASS

 

 

Analog D-BASS

Level

 

D-BASS 3

Level

 

D-BASS 3

 

 

 

 

D-BASS 2

 

 

D-BASS 2

 

 

D-BASS 1

 

 

D-BASS 1

0dB

 

Frequency (Hz)

0dB

 

Frequency (Hz)

 

 

 

 

 

 

 

 

Adjusting the bass curve

Turn the D-BASS dial to adjust the bass level (1, 2 or 3).

“D-BASS” appears in the display.

During CD playback, “DIGITAL D-BASS” appears in the display.

To cancel, turn the dial to the OFF position.

Note

If the bass sound becomes distorted, adjust the D- bass dial or volume control.

Additional

Information

Precautions

If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it.

If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse.

If no sound comes from the speakers of

two-speaker systems, set the fader control to the centre position.

•If your car is equipped with a power aerial, it will extend automatically while the unit is operating.

If you have any questions or problems

EN

concerning your unit that are not covered in

 

 

this manual, please consult your nearest Sony

Other

dealer.

Functions/Additional

Notes on handling CDs

 

A dirty or defective disc may cause sound

 

dropouts while playing. To enjoy optimum

 

sound, handle the disc as follows.

 

Handle the disc by its edge. To keep the disc

 

clean, do not touch the surface.

 

Do not stick paper or tape on the labelled

Information

 

surface.

 

17