Getting Started

Resetting the unit

Attaching the front panel

Align part A of the front panel to part B of the unit as illustrated, and push until it clicks.

Before operating the unit for the first time or after replacing the car battery, you must reset the unit.

Press the reset button with a pointed object, such as a ballpoint pen.

B

Notes

A

Reset button

Notes

Pressing the reset button will erase the clock and some memorized functions.

When you connect the power supply cord to the unit or reset the unit, wait for about 10 seconds before you insert a disc. If you insert a disc within these 10 seconds, the unit will not be reset, and you will have to press the reset button again.

Detaching the front panel

You can detach the front panel of this unit to prevent the unit from being stolen.

1 Press (OFF).

2 Press (RELEASE) to open up the front panel. Then slide the front panel a little to the left, and pull it off towards you.

(OFF)

Be sure not to attach the front panel upside down.

Do not press the front panel hard against the unit when attaching it. Press it lightly against the unit.

Do not press hard or put excessive pressure on

the display windows of the front panel.

 

Do not expose the front panel to direct sunlight,

EN

heat sources such as hot air ducts, and do not

 

 

leave it in a humid place. Never leave it on the

Getting

temperature.

dashboard of a car parked in direct sunlight

 

where there may be a considerable rise in

Started

If you turn the ignition key switch to the OFF

Caution alarm

 

position without removing the front panel, the

 

caution alarm will beep for a few seconds

 

(only when the POWER SELECT switch is set

 

to the A position).

 

If you connect an optional power amplifier and

 

do not use the built-in amplifier, the beep tone

 

will be disabled.

 

(RELEASE)

 

Notes

 

• Be sure not to drop the panel when detaching it

 

from the unit.

 

If you press (RELEASE) to detach the panel while

 

the unit is still on, the unit will turn off

 

automatically to prevent the speakers from

 

being damaged.

 

When you carry the front panel with you, put it

5

in the supplied front panel case.