To cancel the current traffic announcement
Press (AF/TA) or (SOURCE) momentarily. To cancel all traffic announcements, turn off the function by pressing (AF/TA) until
Presetting the volume of traffic announcements
You can preset the volume level of the traffic announcements beforehand so you won’t miss the announcement. When a traffic announcement starts, the volume will be automatically adjusted to the preset level.
1 Select the desired volume level.
2 Press (AF/TA) for two seconds.
“TA” appears and the setting is stored.
EN | Receiving emergency | |
announcements | ||
| ||
| If an emergency announcement comes in while | |
| you are listening to the radio, the programme | |
| will be automatically switched to the | |
| announcement. If you are listening to a source | |
| other than the radio, the emergency | |
| announcements will be heard if you set AF or | |
| TA to on. The unit will then automatically | |
| switch to these announcements no matter what | |
| you are listening to at the time. |
Presetting the RDS stations with the AF and TA data
When you preset RDS stations, the unit stores each station’s data as well as its frequency, so you don’t have to turn on the AF or TA function every time you tune in the preset station. You can select a different setting (AF, TA, or both) for individual preset stations, or the same setting for all preset stations.
Presetting the same setting for all preset stations
1
2 Press (AF/TA) repeatedly to select either
Note that selecting
3 Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until “BTM” appears.
4 Press (4) (n).
5 Press (SHIFT).
Presetting different settings for each preset station
1 Select an FM band, and tune in the desired station (page 9).
2 Press (AF/TA) repeatedly to select either
3 Press the desired number button until “MEM” appears.
Repeat from step 1 to preset other stations.
Tip
If you want to change the AF and/or TA setting after you tuned in the preset station, you can do so by turning the AF or TA function on or off.
12