Using the rotary commander

The rotary commander works by pressing buttons and/or rotating controls.

CDX-C4850R/C4840R only:

You can also control optional CD or MD units with the rotary commander.

By pressing buttons(the SOURCE and MODE buttons)

(SOURCE)

(MODE)

Each time you press (SOURCE), the source changes as follows:

TUNER nCD nMD*

*If the corresponding optional equipment is not connected, this item will not appear. (CDX-C4850R/C4840R only)

Pressing (MODE) changes the operation in the following ways;

• Tuner: FM1 nFM2 nMW nLW

•CD unit: CD1 nCD2 n…

•MD unit: MD1 nMD2 n…

By rotating the control (the SEEK/AMS control)Rotate the control momentarily and release it to:

•Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to start playback.

•Tune in stations automatically. Rotate and hold the control to find a specific station.

By pushing in and rotating the control (the PRESET/DISC control)Push in and rotate the control to: •Receive the stations memorised on the

number buttons.

•Change the disc. (CDX-C4850R/C4840R only)

17