Playing specific tracks only

You can select:

•BANK-ON - to play the tracks with the “PLAY” setting.

•BANK-INV (Inverse) - to play the tracks with the “SKIP” setting.

1 During playback, press (SHIFT), then press (3) (PLAY MODE) repeatedly until “BANK” appears.

2 Press (4) (n) to repeatedly until the desired setting appears.

z BANK-ON z BANK-INV z BANK-OFF

Playback starts from the track following the current one.

3 Press (SHIFT).

To return to normal playing mode, select “BANK-OFF“ in step 2 above.

Additional

Information

Precautions

•If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it.

•If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse.

•If no sound comes from the speakers of

2-speaker systems, set the fader control to the centre position.

•If your car is equipped with a power aerial, it will extend automatically while the unit is operating.

•Connecting this unit may cause some car battery wear when your car has no ACC (accessory) position on the ignition key switch.

If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer.

Notes on handling CDs

A dirty or defective disc may cause sound dropouts while playing. To enjoy optimum sound, handle the disc by its edge. To keep the disc clean, do not touch the surface.

Do not stick paper or tape on the labelled surface.

continue to next page n

25