Press (PTY/LIST) for two seconds.
Press (DSPL) for two seconds.
Press (SOURCE) repeatedly to select CD.

Labelling a CD — Disc Memo

(For a CD unit with the custom file function)

You can label each disc with a personalised name. You can enter up to eight characters for a disc. If you label a CD, you can locate the disc by name (page 24) and select the specific tracks for playback (page 24).

1 Play the CD and press (PTY/LIST) for two seconds.2 Enter the characters.1Rotate the dial clockwise to select thedesired characters.(A nB nC n··· Z n0 n1 n2 n··· 9 n+ n– n* n/ n\ n> n< n. n_ )

If you rotate the dial counterclockwise, the characters will appear in reverse order.

If you want to put a blank space between characters, select “_” (under- bar).

2Press (4) (n) after locating the desired character.

The flashing cursor moves to the next space.

If you press (1) (N), the flashing cursor moves to the left.

3Repeat steps 1 and 2 to enter the entire name.

3 To return to normal CD playback mode, press (PTY/LIST) for two seconds.

Tip

To erase or correct a name, enter “_” (under-bar) for each character.

Displaying the disc memoPress (DSPL) during CD or CD TEXT disc playback.

Each time you press (DSPL) during CD or CD TEXT disc playback, the item changes as follows:

$

Track number/

Elapsed playback time

$

Disc memo name

$

Track name*

$

Clock

*If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc.

Erasing the disc memo

1

2 Press (MODE) repeatedly to select the CD unit.

3

4

5 Rotate the dial to select the name you want to erase.6 Press (5) (ENTER) for two seconds. The name is erased.

Repeat steps 5 and 6 if you want to erase other names.

7 Press (PTY/LIST) for two seconds. The unit returns to normal CD playback mode.

Note

When a personalised label is erased, the original CD TEXT information will appear in the display.

23