Receiving the memorised stations

1 Press (SOURCE) repeatedly to select the tuner.

2 Press (MODE) repeatedly to select the band.

3 Press the number button ((1) to (6)) on which the desired station is stored.

Tip

Press either side of (DISC/PRST) to receive the stations in the order they are stored in the memory (Preset Search Function).

If you cannot tune in a preset station

Press either side of (SEEK/AMS) to search for the station (automatic tuning). Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received.

Note

If the automatic tuning stops too frequently, press (MENU), then press either side of (DISC/PRST) repeatedly until “LOCAL” (local seek mode) is displayed. Then press the (+) side of (SEEK/AMS) to select “LOCAL-ON.” Press (ENTER).

Only the stations with relatively strong signals will be tuned in.

Tips

•When you select the “LOCAL-ON” setting, “L.SEEK” appears while the unit is searching for a station.

•If you know the frequency of the station you want to listen to, press and hold either side of (SEEK/AMS) until the desired frequency appears (manual tuning).

If FM stereo reception is poor— Monaural Mode

1 During radio reception, press (MENU), then press either side of (DISC/PRST) repeatedly until “MONO-OFF” appears.

2 Press the (+) side of (SEEK/AMS) until “MONO-ON“ appears.

The sound improves, but becomes monaural (“ST” disappears).

3 Press (ENTER).

To return to normal mode, select “MONO-OFF” in step 2.

16