Radio reception

Problem

Cause/Solution

 

 

Preset tuning is not possible.

•Store the correct frequency in the memory.

 

•The broadcast signal is too weak.

 

 

The stations cannot be received.

Connect a power aerial control lead (blue) or accessory power

The sound is hampered by

supply lead (red) to the power supply lead of a car’s aerial

noises.

booster. (Only when your car has built-in FM/MW/LW aerial

 

in the rear/side glass.)

 

 

Automatic tuning is not

The broadcast signal is too weak.

possible.

t Use manual tuning.

The “ST” indication flashes.

•Tune in the frequency accurately.

 

•The broadcast signal is too weak.

 

t Set to the MONO mode (page 16).

 

 

RDS

Problem

Cause/Solution

The SEEK starts after a few

The station is non-TP or has weak signal.

seconds of listening.

t Press (AF) or (TA) repeatedly until “AF-OFF” or

 

“TA-OFF” appears.

 

 

No traffic announcements.

•Activate “TA.”

 

•The station does not broadcast any traffic announcements

 

despite being TP. t Tune to another station.

 

 

PTY displays “NONE.”

The station does not specify the programme type.

 

 

29