Using the rotary commander (optional)

The rotary commander works by pressing buttons and/or rotating controls.

You can also control an optional CD/MD unit with the rotary commander.

By pressing buttons(the SOURCE and MODE buttons)

(SOURCE)

(MODE)

Each time you press (SOURCE), the source changes as follows:

Tuner t CD t MD*

*If the corresponding optional equipment is not connected, this item will not appear.

Pressing (MODE) changes the operation in the following ways:

Tuner: FM1 t FM2 t FM3 t MW t LW

CD unit*: CD1 t CD2 t

MD unit*: MD1 t MD2 t

*If the corresponding optional equipment is not connected, these items will not appear.

By rotating the control (the SEEK/AMS control)Rotate the control momentarily and release it to:

•Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to start playback.

•Tune in stations automatically. Rotate and hold the control to find a specific station.

By pushing in and rotating the control (the PRESET/DISC control)Push in and rotate the control to:

•Receive the stations memorised on the number buttons.

•Change the disc.

22