Changing the operative direction

The operative direction of controls is factory- set as in the illustration below.

To increase

To decrease

If you need to mount the rotary commander on the right side of the steering column, you can reverse the controls operative direction.

Press (SOUND) two seconds while pushing the VOL control.

Tip

You can control the operative direction of controls with the unit.

Adjusting the sound characteristics

You can adjust the bass, treble, balance and fader.

Each source can store the bass and treble levels independantly.

1 Select the item you want to adjust by pressing (SOUND) repeatedly.

VOL (volume) nBAS (bass) nTRE (treble) nBAL (left-right) nFAD (front- rear)

2 Adjust the selected item by rotating the dial.

Adjust within three seconds after selecting. (After three seconds, the dial functions as volume control.)

Changing the sound and display settings

You can set:

•CLOCK (page 7).

•D.INFO (dual information) to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF).

•AMBER/GREEN to change the illumination color to amber or green.

•DIM (Dimmer) to change the brightness of the display.

—Select “ON” to dim the display.

•BEEP to turn the beep tones on or off.

•RM (Rotary Commander) to change the operative direction of the controls of the optional rotary commander.

—Select “NORM” to use the rotary commander in the factory preset position.

—Select “REV” when you mount the rotary commander on the right of the steering column.

•A.SCRL (Auto Scroll) (page 14).

Note

If you connect an optional power amplifier and do not use the built-in amplifier, the beep tone will be disabled.

1 Press (SHIFT).

2 Press (2) (SET UP) repeatedly until the desired setting mode appears.

Each time you press (2) (SET UP), the item changes as follows:

CLOCK nD.INFO* nAMBER/GREEN n DIM

nBEEP nRM nA.SCRL*

*When you have not tune the station or there is no CD/MD being played, these items will not appear.

Note

The displayed item will differ depending on the source.

3 Press (4) (n) to select the desired setting (for example: ON or OFF).

4 Press (SHIFT).

When the mode setting is complete, the normal playback mode appears.

EN

Function Other

13