Other Functions

You can connect an optional rotary commander (RM-X4S) with this unit.

Using the rotary commander

The rotary commander works by pressing buttons and/or rotating controls.

You can control the optional CD or MD changer with the rotary commander.

By pressing the button (the

SOURCE and MODE buttons)

EN (SOURCE)

(MODE)

Every time you press (SOURCE), the source changes as follows:

Tuner nCD nMD nTV*

*When an optional TV tuner or Video is connected.

Pressing (MODE) changes the operation in the following ways:

•Tuner : FM1 nFM2 nAM

•CD changer : CD1 nCD2 n…

•MD changer : MD1 nMD2 n…

•TV/Video : TV nVIDEO1 nVIDEO2 n…

Tip

When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander.

By rotating the control (the SEEK/ AMS control)

Rotate the control momentarily and release it to:

•Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to start playback.

•Tune in the stations automatically. Rotate and hold the control to tune in the specific station.

By pressing in and rotating the control (the PRESET/DISC control)

Push in and rotate the control to: •Receive the stations memorised on the

number buttons. •Change the disc.

Other operations

Rotate the VOL control to

adjust the volume.

Press (ATT) to attenuate the sound.

OFF

Press (OFF) to turn off the unit.

Press (SOUND) to adjust the volume and sound menu.

Press (LIST) to display the memorised names.

12