Displaying the disc memo
Press (DSPL) during CD playback.
CD2 DISC
Each time you press (DSPL) during CD playback, the item changes as follows:
$
Elapsed playback time
$
Disc Name
$
Clock
$
MOTION DISPLAY*
*All the items above are scrolled in the display one by one in order.
Erasing the disc memo
1
2 Press (LIST) for two seconds.
3 Press (DSPL) for two seconds.
4 Rotate the dial to select the name that you want to erase.
5 Press (5) (ENTER) for two seconds. The name is erased.
Repeat steps 4 and 5 if you want to erase other names.
6 Press (LIST) for two seconds.
The unit returns to the normal CD playback mode.
Locating a disc by name
—
You can use this function with discs that have been assigned a custom name. For more information on disc names, refer to “Labeling a CD.”
1 Press (LIST) momentarily.
The name assigned to the disc currently playing appears in the display.
L1
ENTER
2 Press (LIST) repeatedly until you find the desired disc.
3 Press (5) (ENTER) to play back the disc.
Notes
•Once a disc name has been displayed for five seconds, the display goes back to its normal playback mode. To turn off the display, press
(DSPL).
•The track names are not displayed during MD playback.
•If there are no discs in the magazine, “NO DISC” appears in the display.
•If a disc has not been assigned a custom file, “********” appears in the display.
•If the disc information has not been read by the unit, “NOT READ” appears in the display. To load the disc, first press the number button, then choose the disc that has not been loaded.
•The information appears only in upper case. There are also some letters which cannot be displayed (during MD playback).
EN
Changer CD/MD
17