Radio
Memorizing stations automatically
— Best Tuning Memory (BTM)
The unit selects the stations with the strongest signals and memorizes them in the order of their frequencies. You can store up to 10 stations on each band (FM1, FM2 and AM).
Caution
When tuning in a station while driving, use Best Tuning Memory to prevent accidents.
1 Press (SOURCE) repeatedly to select the tuner.
Each time you press (SOURCE), the source changes as follows:
CD ˜TUNER
2 Press (MODE) repeatedly to select the band.
Each time you press (MODE), the band changes as follows:
z FM1 z FM2 z AM
3 Press (SHIFT).
4 Press (3) (PLAY MODE) repeatedly until ”BTM“ appears.
5 Press (4) (n) until ”B.T.M“ appears. The unit stores stations in the order of their frequencies on the number buttons.
A beep sounds and the setting is stored.
6 Press (SHIFT).
Notes
•The unit does not store stations with weak signals. If only a few stations are received, some number buttons will retain heir former setting.
•When a number is indicated in the display, the unit starts storing stations from the one currently displayed.
•If a CD is not in the unit, only the tuner band appears even if you press (SOURCE).
Memorizing only the desired stations
You can store up to 10 stations on each band (20 for FM1 and FM2, 10 for AM) in the order of your choice.
1 Press (SOURCE) repeatedly to select the tuner.
2 Press (MODE) repeatedly to select the band (FM1, FM2 or AM).
3 Push the SEEK/AMS control up or down to tune in the station you want to store on the number button.
4 Press the desired number button ((1) to
(10)) for two seconds until ”MEM“ appears.
The number button indication appears in the display.
Note
If you try to store another station on the same number button, the previously stored station will be erased.
Receiving the memorized stations
1 Press (SOURCE) repeatedly to select the tuner.
2 Press (MODE) repeatedly to select the band (FM1, FM2 or AM).
3 Press the number button ((1) to (10)) momentarily where the desired station is stored.
EN
Player/Radio CD
9