Selecting specific tracks for playback

—Bank (CD changer with custom file function)

If you label the disc, you can set the unit to skip tracks and play only the tracks you want.

1 Start playing the disc and press (SHIFT).

Then press (3) (PLAY MODE) for two seconds.

Bank edit mode

CD2 DISC TRACK

PLAYMODE ENTER

Note

If you have not labeled the disc, the bank edit mode does not appear. To go back to the normal playback mode, press (SHIFT).

EN 2 Push the SEEK/AMS control up or down to select the track number you want to skip and press (5) (ENTER).

CD2 DISC TRACK

PLAYMODE ENTER

The indication changes from “PLAY” to “SKIP.” If you want to return to “PLAY,” press (5) (ENTER) again.

3 Repeat step 2 to set the “PLAY” or “SKIP” mode on all the tracks.

4 Press (3) (PLAY MODE) for two seconds. The unit returns to the normal CD playback mode.

5 Press (SHIFT).

Notes

•You can set the “PLAY” and “SKIP” mode on up to 24 tracks.

•You cannot set the “SKIP” mode on all the tracks.

Playing the specified tracks only

You can select:

•BANK-ON to play the tracks with the “PLAY” setting.

•BANK-INV (Inverse) to play the tracks with the “SKIP” setting.

1 During playback, press (SHIFT), then press (3) (PLAY MODE) repeatedly until “BANK” appears.

2 Press (4) (n) repeatedly until the desired setting appears.

z BANK-ON z BANK-INV z BANK-OFF

CD2 BANK

BANKON

PLAYMODE

Playback starts from the track following the current one.

3 Press (SHIFT).

To go back to the normal playback mode, select “BANK-OFF” in step 2 above.

18