Setting the clock automatically

The CT (Clock Time) data from the RDS transmission sets the clock automatically.

1 Press (SHIFT), then press (2) (SET UP) repeatedly until “CT” appears.
Other Functions

You can connect an optional rotary commander (RM-X4S) with this unit.

Using the rotary

ET

CTOFF

commander

SETUP

2 Press (4) (n) repeatedly until “CT-ON” appears.

The clock is set.

ET

CTCTON

SETUP

3 Press (SHIFT) to return to the normal display.

EN

To cancel the CT functionSelect “CT-OFF” in step 2 above.

Notes

•The CT function may not work even though an RDS station is being received.

•There might be a difference between the time set by the CT function and the actual time.

The rotary commander works by pressing buttons and/or rotating controls.

You can control an optional CD or MD unit with the rotary commander.

By pressing buttons (the SOURCE and MODE buttons)

(SOURCE)

(MODE)

Each time you press (SOURCE), the source changes as follows:

TUNER nCD nMD

Pressing (MODE) changes the operation in the following ways;

•Tuner: FM1 nFM2 nMW nLW

•CD unit: CD1 nCD2 n…

•MD unit: MD1 nMD2 n…

Tip

When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander.

16