Receiving the memorised stations

1 Press (SOURCE) repeatedly to select the tuner.

2 Press (MODE) repeatedly to select the band (FM1, FM2, MW or LW).

3 Press the number button ((1) to (10)) momentarily where the desired station is stored.

If you cannot tune in a preset station

Push the SEEK/AMS control up or down momentarily to search for the station (automatic tuning).

Scanning stops when the unit receives a station. Push the SEEK/AMS control up or down repeatedly until the desired station is received.

Note

If the automatic tuning stops too frequently, press (SHIFT), then press (3) (PLAY MODE) repeatedly until “LOCAL” (local seek mode) is displayed. Then press (4) (n) to select “LOCAL-ON.” Press (SHIFT). Only the stations with relatively strong signals will be tuned in.

Tip

If you know the frequency of the station you want to listen to, push the SEEK/AMS control up or down and hold until the desired frequency appears (manual tuning).

If FM stereo reception is poor— Monaural Mode1 Press (SHIFT), then press (3) (PLAYMODE) repeatedly until “MONO” appears.2 Press (4) (n) repeatedly until “MONO-ON“ appears.

The sound improves, but becomes monaural (“ST” disappears).

3 Press (SHIFT).

To go back to normal mode, select “MONO- OFF” in step 2 above.

Changing the displayed items

Each time you press (DSPL), the item changes as follows:

z Frequency

z Clock

MOTION DISPLAY* Z

*All the items above are scrolled in the display one by one in order.

EN

Radio

11