Radio

Memorising stations automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest signals and memorises them in the order of their frequencies. You can store up to 10 stations on each band (FM1, FM2, MW and LW).

Caution

When tuning in stations while driving, use Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select theEN tuner.

Each time you press (SOURCE), the source changes as follows:

CD ˜TUNER

2 Press (MODE) repeatedly to select the band.

Each time you press (MODE), the band changes as follows:

z FM1 z FM2 z MW z LW

3 Press (SHIFT), then press (3) (PLAYMODE) repeatedly until “B.T.M” appears.4 Press (4) (n).

The unit stores stations in the order of their frequencies on the number buttons.

A beep sound and the setting is stored.

5 Press (SHIFT).

Notes

•The unit does not store stations with weak signals. If only a few stations are received, some number buttons will retain heir former setting.

•When a number is indicated in the display, the unit starts storing stations from the one currently displayed.

Memorising only the desired stations

You can store up to 10 stations on each band (20 for FM1 and FM2, 10 for each MW and LW) in the order of your choice.

1 Press (SOURCE) repeatedly to select the tuner.2 Press (MODE) repeatedly to select the band (FM1, FM2, MW or LW).

3 Push the SEEK/AMS control up or down to tune in the station you want to store on the number button.

4 Keep the desired number button ((1) to(10)) pressed for two seconds until “MEM” appears.

The number button indication appears in the display.

Note

If you try to store another station on the same number button, the previously stored station will be erased.

10