Changing the displayed item

Each time you press (AF/TA), the item changes as follows:

” AF-ON ” TA-ON ”AF.TA-ON*

AF.TA-OFF “

*Select this to turn on both the AF and TA functions.

Notes

•“NO AF” and the station name flash alternately, if the unit cannot find an alternative station in the network.

•If the station name starts flashing after selecting a station with the AF function on, this indicates that no alternative frequency is available. Push the SEEK/AMS control up or down while the station name is flashing (within eight seconds). The unit starts searching for another frequency with the same PI (Programme Identification) data (“PI SEEK” appears and no sound is heard). If the unit cannot find another frequency, “NO PI” appears, and the unit returns to the originally selected frequency.

Listening to a regional programme

The “REG-ON” (regional on) function lets you stay tuned to a regional programme without being switched to another regional station. (Note that you must turn the AF function on.) The unit is factory preset to “REG-ON,” but if you want to turn off the function, do the following.

1 Press (SHIFT), then press (3) (PLAY

MODE) repeatedly until “REG” appears.2 Press (4) (n) repeatedly until “REG-OFF” appears.

3 Press (SHIFT).

Note that selecting “REG-OFF” might cause the unit to switch to another regional station within the same network.

To go back to regional on, select “REG-ON” in step 2 above.

Note

This function does not work in the United Kingdom and in some other areas.

Local link function (UnitedKingdom only)

The Local Link function lets you select other local stations in the area, even though they are not stored on your number buttons.

1 Press a number button that has a local station stored on it.

2 Within five seconds, press the number button of the local station again.

3 Repeat this procedure until the desired local station is received.

Listening to traffic

 

announcements

 

The Traffic Announcement (TA) and Traffic

 

EN

Programme (TP) data let you automatically

 

tune in an FM station is broadcasting traffic

RDS

announcements even though you are listening

to other programme sources.

 

Press (AF/TA) repeatedly until “TA-ON”

 

or “AF.TA-ON” appears.

 

The unit starts searching for traffic

 

information stations. “TP” appears in the

 

display when the unit finds a station

 

broadcasting traffic announcements.

 

When the traffic announcement starts,

 

“TA” flashes. The flashing stops when the

 

traffic announcement is over.

 

Tip

 

If the traffic announcement starts while you are

 

listening to another programme source, the unit

 

automatically switches to the announcement and

 

goes back to the original source when the

 

announcement is over.

 

Notes

•“NO TP” flashes for five seconds if the received station does not broadcast traffic announcements. Then, the unit starts searching for a station that broadcasts traffic announcements.

•When “EON” appears with “TP” in the display, the current station makes use of broadcast traffic announcement of other stations in the same network.

13