During playback, press (SHIFT).
Changing the displayed item

Each time you press (DSPL), the item changes as follows:

$

Elapsed playback time

$

Disc name*1/Artist name*2

$

Track name*1

$

Clock

$

MOTION DISPLAY*3

*1 If you inserted a non-CD TEXT disc, “NO NAME“ appears in the display.

*2 If you play a CD TEXT disc, the artist name appears in the display after the disc name. (Only for CD TEXT discs with the artist name.)

1

2 Press (2) (SET UP) repeatedly until “A.SCRL” appears.3 Press (4) (n) to select “A.SCRL-ON.”

4 Press (SHIFT)

To cancel Auto Scroll, select “A.SCRL-OFF” in step 2 above.

Note

For some CD TEXT discs with an unusually large number of characters:

—Some of the characters are not displayed.

—Auto Scroll does not work.

Locating a specific track—Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS control up or down momentarily.

EN *3 All the items above are scrolled in the display one by one in order.

You can label CD and CD TEXT discs with a personalized name using the disc memo function, refer to “Labeling a CD” (page 22).

To locate succeeding tracks

To locate preceding tracks

SEEK/AMS

However, if you use personalized labels, they will always take priority over the original CD TEXT information when such information is displayed.

Tip

If the name of the CD TEXT disc is too long, you can scroll it across the display by pressing (SHIFT), then (1) (N).

Automatically scrolling a disc name— Auto Scroll

If the disc name/artist name or track name on a CD TEXT disc exceeds 10 characters and the Auto Scroll function is on, the following automatically scrolls on the display:

•The disc name appears when the disc has changed (if the disc name is selected).

•The track name appears when the track has changed (if the track name is selected).

If you press (DSPL) to change the display item, the disc or track name of the CD TEXT disc is scrolled automatically whether you set the function on or off.

Locating a specific point in a track—Manual Search

During playback, push the SEEK/AMS control up or down and hold. Release the button when you have found the desired point.

SEEK/AMS

To search forward

To search backward

Note

If “” or “” appears in the display, that means you have reached the beginning or the end of the disc and you cannot go any further.

8