Press (SHIFT).

Changing the sound and display settings

The following items can be set: •Clock (page 7).

•D.Info (Dual Information) - to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF).

•Amber/Green - to change the illumination color to amber or green.

•Dimmer - to change the brightness of the display.

—Select “on” to dim the display. •Contrast - to adjust the contrast if the

indications in the display are not recognizable because of the unit‘s installed position.

•Beep - to turn on or off the beeps.

•RM (Rotary Commander) - to change the operative direction of the controls of the rotary commander.

—Select “norm” to use the rotary commander as the factory-set position.

—Select “rev” when you mount the rotary commander on the right side of the steering column.

•Loud (Loudness) - to enjoy bass and treble even at low volume. The bass and treble will be reinforced.

•HPF (High Pass Filter).

•LPF (Low Pass Filter).

•M.dspl (Motion display) - to turn the motion display 1, 2, or off.

•A.Scrl (Auto Scroll) (page 8, 17).

Note

If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be disabled.

1

2 Press (3) (SET UP) repeatedly until the desired item appears.

Each time you press (3) (SET UP), the item changes as follows:

Clock nD.Info* nAmber/Green nDimmer

nContrast nBeep nRM nLoud* nHPF*

nLPF* nM.dspl nA.Scrl*

*When no CD or MD is playing, this item will not appear.

Note

The displayed item will differ depending on the source.

3 Press (5) (n) to select the desired setting (Example: on or off).

For the “Contrast” setting, pressing (5) (n) makes the contrast higher, and pressing (2) (N) makes the contrast lower.

4 Press (SHIFT).

After the mode setting is complete, the display returns to normal playback mode.

15