During playback, press (SHIFT).

Changing the display item

Each time you press (DSPL) during CD or CD TEXT disc playback, the item changes as follows:

$

Track number/

Elapsed playback time

$

Disc name*1/Artist name*2

$

Track name*1

$

Clock

*1 If you inserted a non-CD TEXT disc, “NO D.Name” appears in the display.

*2 If you play a CD TEXT disc, the artist name appears in the display after the disc name. (Only for CD TEXT discs with the artist name.)

After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds.

In the Motion Display mode, all the above items are scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See “Changing the sound and display settings” on page 15).

Automatically scrolling a disc name

— Auto Scroll

If the disc name, artist name, or track name on a CD TEXT disc exceeds 10 characters and the Auto Scroll function is on, information automatically scrolls across the display as follows:

•The disc name appears when the disc has changed (if the disc name is selected).

•The track name appears when the track has changed (if the track name is selected).

If you press (DSPL) to change the display item, the disc or track name of the CD TEXT disc is scrolled automatically whether you set the function on or off.

1

2 Press (3) (SET UP) repeatedly until “A.Scrl” appears.

3 Press (5) (n) to select “A.Scrl on.”

4 Press (SHIFT).

To cancel Auto Scroll, select “A.Scrl off” in step 3 above.

Note

For some CD TEXT discs with very many characters, the following cases may happen:

—Some of the characters are not displayed

—Auto Scroll does not work.

Tip

To manually scroll the long name of a CD TEXT disc after activating the Auto Scroll function, press (SHIFT), then (2) (N) (manual scroll).

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS control up or down and release for each track you want to skip.

To locate succeeding tracks

To locate preceding

tracks

SEEK/AMS

Locating a specific point in a track

—Manual Search

During playback, push the SEEK/AMS control up or down and hold. Release when you have found the desired point.

To search forward

To search backward

SEEK/AMS

Note

If “ ” or “ ” appears in the display, that means you have reached the beginning or the end of the disc and you cannot go any further.

8