Adjusting the frequency of the speakers and the subwoofer(s)
By setting the cut off level of unwanted frequency signals, the speakers connected to the output terminal and/or the subwoofer(s) connected to the sub out terminal will out put a cleare sound image.
Adjusting the frequency of the speakers connected from the output terminal
— High Pass Filter (HPF)
To match the characteristics of the connected speakers from the output terminal, you can cut out the unwanted low frequency signals entering the speakers.
1 Press (SOURCE) to select a source (radio,
CD, or MD).
2 Press (SHIFT), then press (3) (SET UP) repeatedly until “HPF” appears.
3 Press (5) (n) or (2) (N) repeatedly to select desired setting.
Each time you press (5) (n) or (2) (N), the
HPF OFF ÷HPF 80 Hz ÷HPF 120 Hz
4 Press (SHIFT).
When the frequency setting is complete, the display returns to the normal playback mode.
Adjusting the frequency of the subwoofer(s)
— Low Pass Filter (LPF)
To match the characteristics of the connected subwoofer(s), you can cut out the unwanted high and middle frequency signals entering the subwoofer(s).
1 Press (SOURCE) to select a source (radio,
CD, or MD).
2 Press (SHIFT), then press (3) (SET UP) repeatedly until “LPF” appears.
3 Press (5) (n) or (2) (N) repeatedly to select desired setting.
Each time you press (5) (n) or (2) (N), the
LPF OFF ÷LPF 80 Hz ÷LPF 120 Hz
4 Press (SHIFT).
When the frequency setting is complete, the display returns to the normal playback mode.
16